Exam-Examples

Due to the change in lecturer by Winter-Termin 2020/21 there was the request to get a better idea on what to expect in the exam. The following tasks are examples of how the exam-tasks are going to look like. The exam is focussing on testing an understanding of the use of measurement technology. It is not focussed (too) much on the theory behind each measurement, although of course basic dimensioning has to be done. If there are any questions, feel free to either comment in the forum in Stud-IP or directly below the corresponding task. 

Additional information:

• The duration of the exam is 90 minutes
• It is a "Kofferklausur", so you can bring everything you want and can carry to the exam, excluding tools for communication (e.g. phones, laptops etc.)
• There will be a maximum of three separate tasks similar to those below for the exam, maybe even only two if a task is longer than average. In other words: Not all sensors and measurement technologies of the lecture will be tested in the exam. Of course you will not know which one we choose, sorry.

• Weighting a Vaccine
  • Solution to "Weighting a Vaccine"
• Thickness of a plastic sheet / glass plate
• Injection-Molding Process Control
  • Solution to "Injection-Molding Process Control"
• Measurement Technology Consultation (WS 2021/22)
• Resistance Measurements
  • Solution for "Resistance Measurements"