PA - Programming and Implementation of an STM32-Based EIT Measurement Module

Offizieller Titel Deutsch

Programmierung und Implementierung eines STM32-basierten EIT-Messmoduls

Official Titel English

Programming and Implementation of an STM32-Based EIT Measurement Module

Task Description / Aufgabenstellung

As part of the SFB project at iMEK, a 256-electrode Electrical Impedance Tomography (EIT) system is being developed to enable fast, reliable, and scalable measurements. A key challenge lies in integrating a large number of electrodes into a single system while ensuring high signal integrity and modular expandability.

For the first prototype, an 8-electrode setup has been designed and requires verification. An STM32 microcontroller will be used to control the electronics and perform the measurements.

Given System Architecture:

• STM32H7 microcontroller

• 8-channel ADC

• 2-channel DAC

• Multiplexer (MUX)

The implementation shall first be carried out using development boards. Once validated, the design will be applied to the actual measurement system.

Requirements and Deliverables:

• Clean, reusable, and well-documented codebase.

• Modular software design, with each IC implemented as a separate class.

• Stepwise development methodology with clear documentation of design decisions.

• Demonstration of functionality on the prototype hardware.

• Code and methods prepared to serve as a foundation for future expansions (e.g., scaling up from 8 to 256 electrodes).

Zeitplanung:

Checklist

• Introduction / tour in M4

• Urheberrechtsvereinbarung signed: https://www.tuhh.de/t3resources/sls/pdf/ZPA/Formulare_oeffentlich/Rechte_an_Abschlussarbeiten.pdf

• if applicable: signed confidential agreement

• official registration

Helpful links:

• Thesis Work / Studentische Arbeiten 

• Criteria for the evaluation of Bachelor's and Master's theses, handout version

• Laborordnung

• Spotlights / Kurzvorträge

• Templates (Latex, ppt etc.)

Document Upload Final Thesis / Dokumentenabgabe Abschlussdokument

Open

File of final presentation / Dokumentenabgabe Abschlusspräsentation

Link for further files / Link für weitere Dokumente